Relationship between the growth and survival of larval Pacific bluefin tuna, Thunnus orientalis

We tested the hypothesis that a large body size and rapid growth rate affect the survival of larval Pacific bluefin tuna, Thunnus orientalis (PBT), and analyzed larval growth in relation to environmental conditions. Seven high density larval patches of PBT were tracked with reference buoys in the northwestern Pacific Ocean for 28–171 h in May–June from 2004 to 2008. The otolith radii and daily growth rates of the survivor larvae (collected on later tracking days of each tracking session) tended to be larger and more rapid, respectively, than those of original larvae (collected on earlier tracking days). A large body size was found to positively affect the survival of larval PBT, as did a rapid growth rate, even at an early larval stage (7 days after hatching). Generalized linear modeling showed that the otolith radius was influenced positively by the sea temperature, stratification parameter and food density, while the growth rate was influenced positively by the sea temperature and food density.     

Serial variations of trace metal concentrations in aquatic insect Stenopsyche marmorata

Caddisfly larvae (Stenopsyche marmorata) instar V, periphyton, sediment and river water at a non‐contaminated upstream site, a metallic contaminated downstream site, and industrial wasterwater which caused the metallic contamination were collected once a month for 21 months. Nickel (Ni), copper (Cu), zinc (Zn), and lead (Pb) concentrations in these samples were measured. Significant serial variations of the 4 metal concentrations in the larvae showed a seasonal tendency at the upstream site but not at the downstream site. The larvae more clearly indicated the influence of industrial wastewater than periphyton. As the larvae of Stenopsyche marmorata could be collected throughout the year, this larva is useful for monitoring trace metal contamination in rivers.     

Assessment of biological effects and harm to Japanese medaka due to carbonized carbon fibers generated by a pyrolysis carbon fiber recycling process

Journal of Material Cycles and Waste Management - Carbon-fiber-reinforced plastics (CFRPs) are used as structural materials in the aircraft and automotive industries owing to their lightweight and...     

Fabrication of bulk materials with zeolite from coal fly ash

After packing a compact of coal fly ash mixed with 3.5?M (mol/L) sodium hydroxide solution into a cylindrical plastic mold at 80?°C and 50?% relative humidity for 24?h, the plastic mold was released and the compact was immersed in 3.5?M sodium hydroxide solution at 80?°C for 48?h. When the resultant compact was removed from the solution and cured at 80?°C and 50?% relative humidity for 7?days, a bulk material with zeolite was formed. The strength of the resultant bulk material was a result of the formation of geopolymer (alkali-activated cement). The specific surface area and the compressive strength of the bulk body sample were 21.4?m²/g and 29.0?MPa, respectively. According to a quantitative analysis conducted using the X-ray diffraction (XRD) technique, the content of the formed Na-P type zeolite was estimated to be approximately 28.2?% in mass ratio. The pore size of the resultant bulk materials with zeolite ranges from sub-nanometer to several tens of nanometers, so the resultant bulk material with zeolite exhibited excellent water vapor retention characteristics.     

NEWS

Abstract

Co-integration theory has been employed in this paper and Granger causes are found between urbanization rate and GDP, between capital stock and GDP. Scenario analysis of GDP is performed using the GDP model established in the paper. The energy consumptions in Germany, Japan and other developed countries are analyzed and compared with the energy consumption in China. Environmental friendly scenario of energy demand and CO₂ emissions for sustainable China has been formed based on the results of comparison. Under environmental friendly scenario, the primary energy consumption will be 4.31 billion ton coal equivalence (tce) and CO₂ emissions will be 1.854 billion t-c in 2050; energy per capital will be 3.06 tce that is 1.8 times of energy consumed in 2005 in China and 51% of consumed energy per capital in Japan in 2003. In 2050, the energy requirement of unit GDP will be 20% lower than that of Germany in 2003, but will be still 37% higher than that in Japan in 2003. It is certain that to fulfill the environmental friendly Scenario of energy demand and CO₂ emissions is a difficult task and it needs long term efforts of the whole society, not only in production sectors but also in service and household sectors.     

密闭压力容器小型循环试验结果

在联合国危险品运输试验和标准建议书(桔皮书)中,系列E涉及评价物质在密闭容器中对剧烈加热的热爆炸敏感性的标准。但是人们一直希望并致力于发展一种定量,可靠,重复性好的方法来评价物质的热爆炸敏感性。本文介绍了一种小型密闭压力容器循环试验的研究及其作为一种筛选试验向联合国提案的最新进展。实验结果表明,几种物质在不同实验室的重复性非常好,其(dP／dt)max平均偏差率在20％以内,表明该小型密闭压力容器作为评价物质热反应危险性的测试方法具有较高的可靠性。     

日本的碳储量

为估计所谓的非能源用途矿物燃料排放的CO2,建立了NEAT(Nonenergy use Emission Accounting Tables,非能源排放统计表)模型.物质流动的统计是该模型的基础.NEAT模型已在许多国家应用,以便验证该模型并促进其应用.本文讨论日本的研究案例.NEAT分析表明:1996年的CO2排放量比以前政府间气候变化委员会(IPCC)指导原则基础上的估计高出23t,相当于日本温室气体总排放量的1.9%.因此,在未来几年,调整日本的排放计算方法,提供更为详细的排放估计方法是可取的.鉴于其它国家的相似结果,建议改进IPCC的指导原则.     

Mobilization of arsenic from subsurface sediments by effect of bicarbonate ions in groundwater

Arsenic leaching by bicarbonate ions has been investigated in this study. Subsurface sediment samples from Bangladesh were treated with different carbonate and bicarbonate ions and the results demonstrate that the arsenic leaching efficiency of the carbonate solutions decreased in the order of Na2CO3>NaHCO3>BaCO3>MnCO3. Sodium carbonate and bicarbonate ions extracted arsenic most efficiently; Na2CO3 leached maximum 118.12 microg/l of arsenic, and NaHCO3, 94.56 microg/l of arsenic from the Ganges delta sediments after six days of incubation. The arsenic concentrations extracted in the batch experiments correlated very well with the bicarbonate concentrations. The kinetics study of arsenic release indicates that arsenic-leaching rate increased with reaction time in bicarbonate solutions. Bicarbonate ions can extract arsenic from sediment samples in both oxic and anoxic conditions. A linear relationship found between arsenic contents in core samples and those in leachates suggests that dissolved arsenic concentration in groundwater is related to the amount of arsenic in aquifer sediments. In batch experiment, bicarbonate solutions effectively extracted arsenic from arsenic adsorbed iron oxyhydroxide, reflecting that bicarbonate solutions may mobilize arsenic from iron and manganese oxyhydroxide in sediments that are ubiquitous in subsurface core samples. Carbonate ion may form complexes on the surface sites of iron hydroxide and substitute arsenic from the surface of minerals and sediments resulting in release of arsenic to groundwater. Like in the batch experiment, arsenic and bicarbonate concentrations in groundwater of Bangladesh correlated very well. Therefore, bicarbonate leaching is presumed to be one important mechanism to mobilize arsenic in bicarbonate dominated reducing aquifer of Bangladesh and other parts of the world as well.     

Environmental conditions for the formation of insoluble Tc in water ponds located above paddy fields

Optimum conditions for the formation of insoluble Tc (Tc in >0.2 microm size fraction) were studied using a microcosm including water ponds above a paddy field to understand Tc behavior in such fields. In the microcosm, soluble TcO(4)(-) was converted to insoluble forms, but no changes in the form of Tc were observed in filtered microcosm samples which were microorganisms-free. The formation of insoluble Tc was inhibited by the addition of the antibiotic chloramphenicol. In addition, the reduction of soluble Tc(VII)O(4)(-) to low-valence oxide was not observed in the filtered microcosm samples, although reducing conditions were present. These results indicated that bacteria were involved in the formation of insoluble Tc. Since oxidizing conditions influence bacterial metabolism, the formation of insoluble Tc by bacteria was studied under aerobic and anaerobic conditions. The results showed that anaerobic conditions were favorable for the formation of insoluble Tc. In addition, the addition of formate as an electron donor to a microcosm sample facilitated the formation of insoluble Tc. The results suggested that insoluble Tc in the water ponds above paddy fields was caused by bacteria, which were shown to couple the oxidation of formate to the reduction of Tc(VII) during anaerobic respiration.     

Effect of carbon particles on heavy metal emissions under ash-melting conditions

In Japan, incineration ash is subjected to a melting process to reduce waste volume and to stabilize hazardous heavy metals. In previous articles, we reported that large quantities of volatile metals are emitted under ash-melting conditions at temperatures higher than 1200°C and that such emissions are considerably increased under reducing conditions. However, the emission behavior in the presence of large amounts of char particles was unclear, and we suspected that emissions under these conditions might differ from emissions under the previous conditions. Therefore, we investigated heavy metal emissions and the melting characteristics of ash in the presence of carbon particles. In this experiment, a small crucible with ash and carbon was rapidly heated using a high-frequency induction-heating furnace to simulate the melting ash gasification with carbon. As a result, it was found that additive carbon can promote emissions of heavy metals such as zinc and lead and control the melt of the ash.